title scale date dr dwg rev the information contained in this document is propr ietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by pv8f2v1ssg-3g1 1/25/2013 52-PV8F2V1SSG3G1 a ebp 1 1 panel cutout max. panel thickness 10mm 3 1 2 4 (+) (+) (-) a 20986 release for production 1/25/13 ebp 38.40 ` .50 1.512 ` .020 in [ ] 28.00 ` .50 1.102 ` .020 in [ ] 19.30 [.760 in] n 28.00 [1.102 in] n 19.80 [.780 in] n 15.50 [.610 in] 2.00 [.079 in] m25x1.0 n 25.00 [.984 in] actuator finish: stainless steel body finish: stainless steel ring illumination red/green note: 1. all dimensions in mm [inch] 2. general tolerance: x.x = 0.4 x.xx = 0.25 3. terminal nos. for ref. only 4. function: spdt 5. rating: 2a @ 48vdc 6. illumination voltage: 1.8v forward, 2.8v rever se 7. contact resistance: 50m max. @ 1a 12vdc 8. insulation resistance: 1,000m @ 500vdc 9. dielectric strength: 2,000vac min. for 1 minute 10. electrical life: 50,000 cycles 11. operating temperature: -40c to 70c 12. ingress protection: ip65 13. supplied hardware: o-ring and hexnut 14. denotes critical parameter 15. 2002/95/ec (rohs) compliant 16. illumination color: red (forward), green (revers e) 17. contact plating: gold pos. 1 pos. 2 switch function 1-2 5-6 (3-4) (7-8) (on) = momentary 13 5 7 (-) 24 6 8 (+) dpdt contact configuration red grn 7.00 [.276 in] 13.60 [.535 in] 16.80 [.661 in] 6.00 [.236 in] 24.90 [.980 in] 36.60 [1.441 in] dot denotes forward voltage led color .50 [.020 in]
|
